We completely redesigned the front sway bar setup for indoor carpet and other high grip racing surfaces, this front sway bar kit dramatically reduces chassis roll without causing suspension bind or interfering with other components.  This is also a good way to tune for more agressive front tires such as fuzz bites.  Kit comes with (3) front bars, 1.8mm, 2.0mm and 2.3mm.  (Up to 3mm bar is available separately).  Also includes CNC machined gold anodized aluminum mounting bracket, (2) end links, (2) flange bearings, (2) sway bar bearing collars, hardware and drill guide fixture.  2mm drill bit and hand drill required to install.  All made in-house here at Paragon/Goochie Speed.
 
You will need to drill through both shock holes in both front arms, simply insert a 2mm drill in the back side and drill until it passes through the front of the arm.  You need to do the same on the ballstud mount with the included drill fixture to mount the pivot mount.  Slip the drill fixture on the back of the ballstud mount flush with the bottom, then drill 2 holes.